2025-12-23For the sealing protection of cable trays through walls/rooms, when cable trays enter indoors from outdoors (such as substations and other electrical rooms), the through wall parts must be sealed. Fire blocking materials, sand sealing, and other methods can be used to prevent rainwater, moisture, and dust from entering and ensure the safe operation of indoor electrical systems. If fiberglass material bridge is used, a slope of not less than 1% should be set for outdoor installation, and the slope should be used for natural drainage to completely eliminate the problem of rainwater backflow.
The installation methods of cable trays are flexible and diverse, and the following mainstream forms can be selected according to the on-site working conditions:
Installation along the roof: Suitable for large space scenarios such as factories and computer rooms, fully utilizing the top space without occupying the ground and wall work areas. Horizontal/vertical installation along the wall: suitable for places with ample wall space, easy to install and maintain in the future. Installation along vertical shafts: commonly used in high-rise buildings or multi story factories to meet the vertical cable laying requirements, with regular wiring and high safety. Installation along the ground: Suitable for ground cable trenches or elevated floor scenarios, facilitating centralized management and maintenance of cables. Installation along cable trenches and pipeline supports: co laying with other pipelines to save space and enhance the overall layout rationality.The support (hanger) used for bridge installation can be selected from standardized finished products or customized processed parts according to project budget and actual needs, ensuring that the bearing capacity and stability of the support comply with design specifications.